ATSAMD20J18A-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J18 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 2 Mb |
| ROM (words) | 262144 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of ADC Channels | 20 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAMD20J18A-AUT Overview
It is available in the 64-LQFP package for the benefit of saving space. Mounted using Surface Mount. It comes in a Tape & Reel (TR) package. With a processor of ARM? Cortex?-M0+ cores, the device is powered. Working at -40°C~85°C TA temperature is recommended. In terms of its program memory type, it is FLASH. There are 52 I/Os on the board. In order to find similar components, it has a base part number of ATSAMD20J18. QUAD is the position of its terminals on the board. This circuit consists of 64 terminationals. It is a member of the SAM D20J series of electrical components. The supply voltage of 3.3V allows for high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed using 64 pins. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 256kB which may be used to store programs and data. The architecture of its core is ARM. At a frequency of 48MHz, it exhibits excellent efficiency. It appears that there are 8 timers/counters in use. As part of the CORTEX-M0 CPU family, this component is included. Normally, the supply voltage (Vsup) should remain above 1.62V. Using a Internal oscillator type, it works well.
ATSAMD20J18A-AUT Features
64-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20J18A-AUT Applications
There are a lot of Microchip Technology ATSAMD20J18A-AUT Microcontroller applications.
- Projectors
- Christmas lights
- Microwave ovens
- Entertainment-radios, CD players, televisions
- Guidance-GPS
- Coffee machines
- Embedded gateways
- Smoke alarms
- Removable disks
- Industrial instrumentation devices
