ATSAMD20J18A-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-UFBGA |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 2 Mb |
| Core Architecture | ARM |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 0.65mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J18A-CU Overview
To save space, it is included in the 64-UFBGA package. In this case, it is mounted using the method of Surface Mount. In the package Tray, it is included. There is a ARM? Cortex?-M0+ as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory it uses is FLASH. 52 I/Os can be found on it. In order to find similar components, it has a base part number of ATSAMD20J18. The terminals of this device are located at BOTTOM. 64 terminations are present in it. The electrical component is part of the series SAM D20J. By using a 3.3V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. The structure is composed of 64 pins. In the device, there is a memory capacity of 256kB which may be used to store programs and data. The core architecture of the system is ARM. When working at a frequency of 48MHz it is able to achieve excellent efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. The number of timers and counters is 8. 52 is the number of programmable I/O. Using an oscillator type of Internal, it works.
ATSAMD20J18A-CU Features
64-UFBGA package
Mounting type of Surface Mount
ATSAMD20J18A-CU Applications
There are a lot of Microchip Technology ATSAMD20J18A-CU Microcontroller applications.
- Firewalls
- Blood pressure monitors
- Multi-meter
- Accu-check
- Projectors
- Volt meter
- 3D printers
- Radio
- Smart instruments
- Toys
