ATSAMD20J18A-MN
| Parameters | |
|---|---|
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 2 Mb |
| Core Architecture | ARM |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2014 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J18 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
ATSAMD20J18A-MN Overview
A space-saving advantage is that it is included in the 64-VFQFN Exposed Pad package. Surface Mount is used for mounting. It is available in the Tray package. It is equipped with a ARM? Cortex?-M0+ core processor. When working, it is recommended that the temperature be kept at -40°C~105°C TA. Memory type FLASH is used for program memory. A total of 52 I/Os are available on this device. To find comparable components, use the ATSAMD20J18 base part number. A QUAD position is assigned to its terminals. Currently, it consists of 64 terminationals. In the SAM D20J series, this electrical component is found. High efficiency is possible due to the 3.3V supply voltage. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. For its construction, 64 pins are used. Memory size for the devices is 256kB, which can be used to store programs and data. ARM is the foundation of its architecture. Working at a frequency of 48MHz results in excellent efficiency. The number of timers and counters is 8. A chip with 52 programmable inputs/outputs is available. A supply voltage (Vsup) above 1.62V is necessary for normal operation. Using an oscillator type of Internal, it works.
ATSAMD20J18A-MN Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J18A-MN Applications
There are a lot of Microchip Technology ATSAMD20J18A-MN Microcontroller applications.
- Heart rate monitors
- Sonography (Ultrasound imaging)
- Computers and laptops-video calling, email, blogging
- Digital TVs
- Answering machines
- Light sensing & controlling devices
- PDAs, game consoles
- Robotic prosthetic limbs
- Hand-held metering systems
- Christmas lights
