ATSAMD20J18A-MNT
| Parameters | |
|---|---|
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 2 Mb |
| Core Architecture | ARM |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J18 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
ATSAMD20J18A-MNT Overview
There is an option to purchase it in the 64-VFQFN Exposed Pad package, which saves space. Using Surface Mount, it is mounted. You can find it in the package of Tape & Reel (TR). ARM? Cortex?-M0+ core processor is present on the device. During work, the temperature should remain at -40°C~105°C TA. Its type of program memory is FLASH. A total of 52 I/Os are present. A comparable component can be found by using the base part number ATSAMD20J18. This device has terminals at QUAD. 64 terminationals are present. This electrical component is part of the SAM D20J series. The supply voltage of 3.3V allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. For its construction, 64 pins are used. A device with a memory size of 256kB can store programs and data. Its core architecture is ARM. Working at a frequency of 48MHz results in excellent efficiency. It appears that there are 8 timers/counters in use. 52 is the number of programmable I/O. In order to maintain normal operation, Vsup must be above 1.62V. The oscillator type Internal is used to operate the device.
ATSAMD20J18A-MNT Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J18A-MNT Applications
There are a lot of Microchip Technology ATSAMD20J18A-MNT Microcontroller applications.
- Microwave ovens
- Instrument control
- Computer/laptop
- Petrochemical
- Heart rate monitors
- Embedded gateways
- Set-top boxes
- Fire detection & safety devices
- Oil and gas
- Hand-held metering systems
