ATSAMD20J18A-MU
| Parameters | |
|---|---|
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 2 Mb |
| ROM (words) | 262144 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 52 |
| Number of ADC Channels | 20 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 206.29948mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J18 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
ATSAMD20J18A-MU Overview
As a result, it is available in the 64-VFQFN Exposed Pad package. It is mounted using the way of Surface Mount. You can find it in the package of Tray. ARM? Cortex?-M0+ core processor is present on the device. Work should be done at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. A total of 52 I/Os are available on this device. In order to find similar components, it has a base part number of ATSAMD20J18. The terminals of this device are set to QUAD. A 64 termination is contained within it. Part of the SAM D20J series, this electrical component is used in a variety of applications. The supply voltage of 3.3V allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A total of 64 pins are used in its construction. The component is included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 256kB. ARM forms the basis of its architecture. When working at a frequency of 48MHz it is able to achieve excellent efficiency. 8 timers/counters are in use. This part is an integral part of the CORTEX-M0 CPU family. There are a total of 52 programmable I/Os. In order to ensure normal operation, the supply voltage (Vsup) must remain above 1.62V. Using a Internal oscillator type, it works well.
ATSAMD20J18A-MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20J18A-MU Applications
There are a lot of Microchip Technology ATSAMD20J18A-MU Microcontroller applications.
- Speed meter
- Magnetic resonance imaging (MRI)
- Electromechanical control
- Playstation
- Tape drives
- Safety -airbags, automatic braking system (ABS)
- Computed Tomography (CT scan)
- Printers
- Fabric
- Television
