ATSAMD21E15B-MFT
| Parameters | |
|---|---|
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | Automotive, AEC-Q100, SAM D21E |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD21E15 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
ATSAMD21E15B-MFT Overview
For space savings, it is available in the 32-VFQFN Exposed Pad package. This is mounted using the Surface Mount method. There is a Tape & Reel (TR) package available for it. A ARM? Cortex?-M0+ core processor powers the device. Work should be performed at a temperature of -40°C~125°C TA. There is FLASH program memory in it. A total of 26 I/Os are present. A comparable component can be found by using the base part number ATSAMD21E15. At QUAD, it has its terminals. 32 terminations are present in it. An electrical component such as this is included in the series Automotive, AEC-Q100, SAM D21E. Using the 3.3V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. There are 32 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. Data and programs can be stored on the devices with a memory size of 32kB. A core architecture of ARM is used. This device achieves excellent efficiency at frequencies of 48MHz. 3.3V offers full adaptability and voltage supply when it is employed by designers. The number of timers and counters is 6. Internal is the oscillator type it uses.
ATSAMD21E15B-MFT Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD21E15B-MFT Applications
There are a lot of Microchip Technology ATSAMD21E15B-MFT Microcontroller applications.
- Temperature sensing and controlling devices
- Heart rate monitors
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Speed meter
- DCS control intelligent sensor
- Washing machine
- Tape drives
- Digital set-top boxes
- Laminators
- Fire alarms
