ATSAMD21E16L-AFT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | Automotive, AEC-Q100, SAM D21E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD21E16 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21E16L-AFT Overview
To save space, it is included in the 32-TQFP package. In this case, it is mounted using the method of Surface Mount. There is a Tape & Reel (TR) package available for it. Device with ARM? Cortex?-M0+ core processor issupported. The temperature should be kept at -40°C~125°C TA while working. It has a type of program memory of FLASH. The device has 26 I/Os. Other components that are comparable to it have the base part number ATSAMD21E16. QUAD is the location of its terminals. A 32 termination is contained within it. In the Automotive, AEC-Q100, SAM D21E series, this electrical component is found. Because the supply voltage is 3.3V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. For its construction, 32 pins are used. The devices have a maximum memory size of 64kB that can be used to store programs and data. Its core architecture is based on ARM. Working at a frequency of 48MHz results in excellent efficiency. In order to ensure normal operation, the supply voltage (Vsup) must remain above 1.62V. Using an oscillator type Internal, it operates.
ATSAMD21E16L-AFT Features
32-TQFP package
Mounting type of Surface Mount
ATSAMD21E16L-AFT Applications
There are a lot of Microchip Technology ATSAMD21E16L-AFT Microcontroller applications.
- DDC control
- Fax machines
- Smartphones-calling, video calling, texting, email
- Oil and gas
- Washing machines
- Food and beverage
- Process control devices
- Guidance-GPS
- Automatic staplers
- Calculators
