ATSAMD21E17A-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D21E |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAMD21E17 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 7mA |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| ROM (words) | 131072 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21E17A-AUT Overview
There is an option to purchase it in the 32-TQFP package, which saves space. This is mounted using the Surface Mount method. You can find it in the package of Tape & Reel (TR). Device with ARM? Cortex?-M0+ core processor issupported. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 26 I/Os on it. Based on the ATSAMD21E17 base part number, it can be compared with other components. The terminals of this device are located at QUAD. It has 32 terminationals. It is a member of the SAM D21E series of electrical components. By using a 3.3V voltage supply, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. 32 pins are used to construct it. The method of Surface Mount is used to mount it. It is one of the components included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 128kB. ARM is the foundation of its architecture. Supply current is maximum at 7mA. The system is highly efficient when working at a frequency of 48MHz. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. It appears that there are 6 timers/counters in use. It is one of the members of the CPU family CORTEX-M0. An oscillator of type Internal is used.
ATSAMD21E17A-AUT Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD21E17A-AUT Applications
There are a lot of Microchip Technology ATSAMD21E17A-AUT Microcontroller applications.
- Television
- Graphic terminals
- Security systems
- Paper shredders
- Calculators
- Fire detection & safety devices
- DDC control
- Teletext terminals
- Glucose monitoring systems (for Type 1 Diabetes)
- Christmas lights
