ATSAMD21G16B-MFT
| Parameters | |
|---|---|
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount, Wettable Flank |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | Automotive, AEC-Q100, SAM D21G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD21G16 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
ATSAMD21G16B-MFT Overview
As a result, it is available in the 48-VFQFN Exposed Pad package. The way of Surface Mount, Wettable Flank is used to mount it. It comes in the package?of a Tape & Reel (TR). The device has a ARM? Cortex?-M0+ core processor. When working, the temperature should be kept at -40°C~125°C TA. FLASH is the type of program memory used by it. It has a number of 38I/Os. To find comparable components, use the ATSAMD21G16 base part number. This device has terminals at QUAD. It consists of 48 terminationals. In the Automotive, AEC-Q100, SAM D21G series, this electrical component is found. The supply voltage of 3.3V allows for high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed with 48 pins. Based on the Surface Mount method, it is mounted. In the device, there is a memory capacity of 64kB which may be used to store programs and data. Its core architecture is based on ARM. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. 6 counters/timers are currently active. An oscillator of type Internal is used.
ATSAMD21G16B-MFT Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount, Wettable Flank
ATSAMD21G16B-MFT Applications
There are a lot of Microchip Technology ATSAMD21G16B-MFT Microcontroller applications.
- Refrigerators
- Security systems
- Oil and gas
- DCS control intelligent sensor
- Embedded gateways
- Ipod
- Walkie talkies
- Scanners
- Fax machines
- Petrochemical
