ATSAMD21G16B-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | SAM D21G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD21G16 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21G16B-MUT Overview
Due to its space-saving qualities, it is available in the 48-VFQFN Exposed Pad package. A Surface Mount mounting method is used. It comes in a Tape & Reel (TR) package. It is equipped with a ARM? Cortex?-M0+ core processor. Work should be performed at a temperature of -40°C~85°C TA. The type of memory it uses is FLASH. 38 I/Os are present on the device. A component with the same part number as ATSAMD21G16 can be compared to other similar components. QUAD is the location of its terminals. 48 terminations are present in it. An electrical component such as this is included in the series SAM D21G. Using the 3.3V supply voltage allows for high efficiency. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. For its construction, 48 pins are used. During the mounting process, the device is mounted based on the Surface Mount method. Using the devices' 64kB memory size, you can store programs and data. The architecture of its core is ARM. This device achieves excellent efficiency at frequencies of 48MHz. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. In total, there are 6 timers and counters. The oscillator type Internal is used to operate the device.
ATSAMD21G16B-MUT Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD21G16B-MUT Applications
There are a lot of Microchip Technology ATSAMD21G16B-MUT Microcontroller applications.
- Leakage current tester
- Data acquisition and control
- Projectors
- Medical instruments chromatographs
- Set-top boxes
- Hard drives
- Smart highways (navigation, traffic control, information monitoring and car service)
- Paper shredders
- Answering machines
- Microwave ovens
