ATSAMD21G17A-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D21G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAMD21G17 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 7mA |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| ROM (words) | 131072 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21G17A-AUT Overview
There is a 48-TQFP package available to save space. It is mounted using the way of Surface Mount. In the package Tape & Reel (TR), it is included. Devices with ARM? Cortex?-M0+ core processors are available. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 38 I/Os on it. A comparable component can be found by using the base part number ATSAMD21G17. The terminals of this device are set to QUAD. 48 terminations are present in it. The SAM D21G series includes this electrical component. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. For its construction, 48 pins are used. Based on the Surface Mount method, it is mounted. Microcontrollers contains this component. Data and programs may be stored on the devices which have a memory size of 128kB. The architecture of its core is ARM. Supply current is maximum at 7mA. The system is highly efficient when working at a frequency of 48MHz. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. There are 6 timers/counters. It is a member of the CORTEX-M0 family of CPUs. An oscillator type Internal is required for it to work.
ATSAMD21G17A-AUT Features
48-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD21G17A-AUT Applications
There are a lot of Microchip Technology ATSAMD21G17A-AUT Microcontroller applications.
- Hearing aids
- Ipod
- Digital set-top boxes
- Refrigerators
- Leakage current tester
- Tape drives
- Heart rate monitors
- Process control devices
- Set-top boxes
- Virtual reality VR robots
