ATSAMD21G18A-AFT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | Automotive, AEC-Q100, SAM D21G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD21G18 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21G18A-AFT Overview
A space-saving advantage is that it is included in the 48-TQFP package. A Surface Mount mounting method is used. You can find it in the package of Tape & Reel (TR). The device runs in ARM? Cortex?-M0+ core processor. When working, the temperature should be kept at -40°C~125°C TA. FLASH is its program memory type. 38 I/Os can be found on it. To find comparable components, use the ATSAMD21G18 base part number. QUAD is the location of its terminals. There are a total of 48 terminations in it. An electrical component such as this is included in the series Automotive, AEC-Q100, SAM D21G. As a result of the 3.3V supply voltage, high efficiency is possible. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. It is constructed using 48 pins. This mount is done in accordance with the method of Surface Mount. Data and programs can be stored on the devices with a memory size of 256kB. ARM is the foundation of its architecture. Using a frequency of 48MHz, it is very efficient. While employing 3.3V, designers can maximize its supply voltage adaptability. 6 timers/counters are in use. Using an oscillator type of Internal, it works.
ATSAMD21G18A-AFT Features
48-TQFP package
Mounting type of Surface Mount
ATSAMD21G18A-AFT Applications
There are a lot of Microchip Technology ATSAMD21G18A-AFT Microcontroller applications.
- Mobile computers
- Oil and gas
- Embedded gateways
- Communication-bluetooth, Wi-Fi, radio
- Sonography (Ultrasound imaging)
- Xbox
- DVD\DV\MP3 players
- Air fryers
- Switches
- Temperature sensing and controlling devices
