ATSAMD21G18A-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D21G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAMD21G18 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 7mA |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 14 |
| Max Junction Temperature (Tj) | 100°C |
| Number of I2C Channels | 6 |
| Ambient Temperature Range High | 85°C |
| Height | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21G18A-AUT Overview
There is a 48-TQFP package available to save space. Surface Mount is used for mounting. Package Tape & Reel (TR) contains it. The device has a ARM? Cortex?-M0+ core processor. Maintain a temperature of -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. 38 I/Os can be found on it. It has a base part number of ATSAMD21G18 that can be used to find other components that are comparable. A QUAD position is assigned to its terminals. As far as terminations are concerned, there are 48 terminations present. SAM D21G is the series number of this electrical component. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. 48 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. It falls under the category of Microcontrollers. Data and programs can be stored on the devices with a memory size of 256kB. The architecture of its core is ARM. The maximum supply current is 7mA. This device achieves excellent efficiency at frequencies of 48MHz. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. 3 timer/counters are present. CORTEX-M0 CPUs are included in this part. The oscillator type Internal is used to operate the device.
ATSAMD21G18A-AUT Features
48-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD21G18A-AUT Applications
There are a lot of Microchip Technology ATSAMD21G18A-AUT Microcontroller applications.
- Digital TVs
- Temperature sensing and controlling devices
- Graphic terminals
- Home video and audio
- Projectors
- Teletext terminals
- Oscilloscopes
- Air fryers
- Electronic jamming systems
- Telephone sets
