ATSAMD21G18A-MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount, Wettable Flank |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2014 |
| Series | Automotive, AEC-Q100, SAM D21G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD21G18 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 10 |
| Core Architecture | ARM |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 14 |
| Max Junction Temperature (Tj) | 100°C |
| Number of I2C Channels | 6 |
| Ambient Temperature Range High | 85°C |
| Height | 900μm |
| Length | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAMD21G18A-MF Overview
As a result, it is available in the 48-VFQFN Exposed Pad package. Surface Mount, Wettable Flank is used for mounting. This item can be found in package Tray. With a processor of ARM? Cortex?-M0+ cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~125°C TA. Memory type FLASH is used for program memory. The device has 38 I/Os. A component with the same part number as ATSAMD21G18 can be compared to other similar components. At QUAD, its terminals are located. In this case, there are 48 terminationals. Part of the Automotive, AEC-Q100, SAM D21G series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. For its construction, 48 pins are used. During the mounting process, the device is mounted based on the Surface Mount method. Memory size for the devices is 256kB, which can be used to store programs and data. Its core architecture is based on ARM. The system is highly efficient when working at a frequency of 48MHz. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. There are currently 10 timers/counters set up on the system. An oscillator of type Internal is used.
ATSAMD21G18A-MF Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount, Wettable Flank
ATSAMD21G18A-MF Applications
There are a lot of Microchip Technology ATSAMD21G18A-MF Microcontroller applications.
- Multi-meter
- Auto-breaking system
- Calculator
- Electronic jamming systems
- Automatic staplers
- Electrocardiogram (EKG)
- Broadband technology, video and voice processing
- Heart rate monitors
- DDC control
- Television
