ATSAMD21G18A-MUT
| Parameters | |
|---|---|
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D21G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAMD21G18 |
| JESD-30 Code | S-XQCC-N48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 7mA |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
ATSAMD21G18A-MUT Overview
As a result, it is available in the 48-VFQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. It comes in a Tape & Reel (TR) package. ARM? Cortex?-M0+ core processor is present on the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. Its type of program memory is FLASH. There are 38 I/Os on it. To find equivalent components, use its ATSAMD21G18 base part number. QUAD is the position of its terminals on the board. It has 48 terminationals. In the SAM D21G series, this electrical component is found. Using the 3.3V supply voltage allows for high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. According to Surface Mount, it is mounted. In the subcategory of Microcontrollers, this component is included. Using the devices' 256kB memory size, you can store programs and data. A core architecture of ARM is used. In this case, 7mA represents the maximum current supply. At a frequency of 48MHz, it exhibits excellent efficiency. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. A total of 6 timers/counters are present. CORTEX-M0 CPUs are included in this part. Internal is the oscillator type it uses.
ATSAMD21G18A-MUT Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD21G18A-MUT Applications
There are a lot of Microchip Technology ATSAMD21G18A-MUT Microcontroller applications.
- Torpedo guidance
- Measuring revolving objects
- Guidance-GPS
- Radio
- Television
- Digital set-top boxes
- Smart highways (navigation, traffic control, information monitoring and car service)
- Entertainment-radios, CD players, televisions
- Oscilloscopes
- Automatic control
