ATSAMD21J15B-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | SAM D21J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD21J15 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21J15B-AUT Overview
For the purpose of saving space, it is available in the 64-TQFP Exposed Pad package. Using Surface Mount, it is mounted. Tape & Reel (TR) is the package that contains it. ARM? Cortex?-M0+ core processor is present on the device. During work, the temperature should remain at -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 52 I/Os on the board. It has a part number of ATSAMD21J15 that can be used to locate similar components. A QUAD position is assigned to its terminals. It has 64 terminationals. This electrical component is part of the SAM D21J series. It is possible to achieve high efficiency with a 3.3V supply voltage. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 64 pins are used in its construction. The method of Surface Mount is used to mount it. The devices have a maximum memory size of 32kB that can be used to store programs and data. ARM is its core architecture. The system is highly efficient when working at a frequency of 48MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. In total, there are 8 timers and counters. The oscillator type Internal is used to operate the device.
ATSAMD21J15B-AUT Features
64-TQFP Exposed Pad package
Mounting type of Surface Mount
ATSAMD21J15B-AUT Applications
There are a lot of Microchip Technology ATSAMD21J15B-AUT Microcontroller applications.
- Torpedo guidance
- PDAs, game consoles
- Industrial instrumentation devices
- Multi-meter
- Fax machines
- Washing machines
- Dryers
- Paper shredders
- Hard drives
- Volt meter
