ATSAMD21J17A-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D21J |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAMD21J17 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 7mA |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| ROM (words) | 131072 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21J17A-AUT Overview
A space-saving advantage is that it is included in the 64-TQFP Exposed Pad package. The way of Surface Mount is used to mount it. You can find it in the package of Tape & Reel (TR). There is a ARM? Cortex?-M0+ as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. It has a type of program memory of FLASH. There are 52 I/Os on the board. In order to find similar components, it has a base part number of ATSAMD21J17. The terminals of this device are set to QUAD. There are a total of 64 terminations in it. This electrical component is part of the SAM D21J series. It is possible to achieve high efficiency with a 3.3V supply voltage. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. 64 pins are used to construct it. The method of Surface Mount is used to mount it. In the subcategory of Microcontrollers, this component is included. The devices have a memory size of 128kB that can be used to store programs and data. The architecture of its core is ARM. 7mA is the maximum supply current. The system is highly efficient when working at a frequency of 48MHz. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. There are 8 timers/counters. It is part of the CORTEX-M0 CPU family. Using an oscillator type of Internal, it works.
ATSAMD21J17A-AUT Features
64-TQFP Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD21J17A-AUT Applications
There are a lot of Microchip Technology ATSAMD21J17A-AUT Microcontroller applications.
- Fax machines
- Leakage current tester
- Computer/laptop
- Oscilloscopes
- DCS control intelligent sensor
- Projector
- Projectors
- Binding machines
- Digital TVs
- Christmas lights
