ATSAMD21J17A-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D21J |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD21J17 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 7mA |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| ROM (words) | 131072 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAMD21J17A-MU Overview
There is an option to purchase it in the 64-VFQFN Exposed Pad package, which saves space. The way of mounting it is Surface Mount. This item can be found in package Tray. ARM? Cortex?-M0+ core processor is present on the device. Working at -40°C~85°C TA temperature is recommended. The type of memory in which this program is stored is FLASH. There are 52 I/Os on it. A comparable component can be found by using the base part number ATSAMD21J17. QUAD is the location of its terminals. In this case, there are 64 terminationals. Part of the SAM D21J series, this electrical component is used in a variety of applications. Because of the 3.3V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. 64 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. In Microcontrollers, this component is included. In the device, there is a memory capacity of 128kB which may be used to store programs and data. The architecture of its core is ARM. 7mA is the maximum supply current. The system is highly efficient when working at a frequency of 48MHz. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. 8 counters/timers are currently active. It is one of the members of the CPU family CORTEX-M0. Internal is the oscillator type it uses.
ATSAMD21J17A-MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD21J17A-MU Applications
There are a lot of Microchip Technology ATSAMD21J17A-MU Microcontroller applications.
- Radio
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Current meter
- Oscilloscopes
- Petrochemical
- Teletext terminals
- Computers and laptops-video calling, email, blogging
- Computer/laptop
- Automatic staplers
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
