ATSAMD21J18A-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-UFBGA |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | SAM D21J |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD21J18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| Height Seated (Max) | 0.65mm |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAMD21J18A-CU Overview
To save space, it is included in the 64-UFBGA package. Surface Mount is used for mounting. A package of Tray contains it. It is equipped with a ARM? Cortex?-M0+ core processor. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. A total of 52 I/Os are present. Other components that are comparable to it have the base part number ATSAMD21J18. At BOTTOM, it has its terminals. It has 64 terminationals. In the SAM D21J series, this electrical component is found. High efficiency is possible due to the 3.3V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. The structure is composed of 64 pins. As a result, it is mounted in accordance with Surface Mount. The devices have a maximum memory size of 256kB that can be used to store programs and data. ARM forms the basis of its architecture. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. 8 timers/counters are in use. Using an oscillator type Internal, it operates.
ATSAMD21J18A-CU Features
64-UFBGA package
Mounting type of Surface Mount
ATSAMD21J18A-CU Applications
There are a lot of Microchip Technology ATSAMD21J18A-CU Microcontroller applications.
- Light sensing & controlling devices
- Gas monitoring systems
- Leakage current tester
- Fabric
- Teletext terminals
- Hard drives
- Blenders
- Computers and laptops-video calling, email, blogging
- Washing machines
- Speed meter
