ATSAMD21J18A-MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount, Wettable Flank |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | Automotive, AEC-Q100, SAM D21J |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD21J18 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 20 |
| Max Junction Temperature (Tj) | 145°C |
| Number of PWM Channels | 14 |
| Number of I2C Channels | 6 |
| Ambient Temperature Range High | 125°C |
| Height | 1mm |
| Length | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAMD21J18A-MF Overview
For space savings, it is available in the 64-VFQFN Exposed Pad package. The way of Surface Mount, Wettable Flank is used to mount it. Tray is the package that contains it. Device with ARM? Cortex?-M0+ core processor issupported. The temperature should be kept at -40°C~125°C TA while working. It has a type of program memory of FLASH. There are 52 I/Os on it, which makes it a very simple device. Based on the ATSAMD21J18 base part number, it can be compared with other components. The terminals of this device are set to QUAD. 64 terminationals are present. Automotive, AEC-Q100, SAM D21J is the series number of this electrical component. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. The structure is composed of 64 pins. The method of Surface Mount is used to mount it. It is possible to store programs and data on the devices, as they have a memory size of 256kB. ARM forms the basis of its architecture. At a frequency of 48MHz, it can achieve excellent efficiency. 3.3V offers full adaptability and voltage supply when it is employed by designers. 8 timers/counters are in use. There is an oscillator type Internal used in this circuit.
ATSAMD21J18A-MF Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount, Wettable Flank
ATSAMD21J18A-MF Applications
There are a lot of Microchip Technology ATSAMD21J18A-MF Microcontroller applications.
- Washing machines
- Firewalls
- Hearing aids
- Printers
- Embedded gateways
- Petrochemical
- Dialysis machines (performs function of liver)
- Smart highways (navigation, traffic control, information monitoring and car service)
- Medical instruments chromatographs
- Electrocardiogram (EKG)
