ATSAMD21J18A-MFT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount, Wettable Flank |
| Package / Case | 64-VFQFN Exposed Pad |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | Automotive, AEC-Q100, SAM D21J |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD21J18 |
| JESD-30 Code | S-XQCC-N64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21J18A-MFT Overview
There is a 64-VFQFN Exposed Pad package available to save space. The way of Surface Mount, Wettable Flank is used to mount it. A package of Tape & Reel (TR) contains it. Device with ARM? Cortex?-M0+ core processor issupported. When working, the temperature should be kept at -40°C~125°C TA. Its type of program memory is FLASH. 52 I/Os can be found on it. To find comparable components, use the ATSAMD21J18 base part number. At QUAD, its terminals are located. Currently, it consists of 64 terminationals. The Automotive, AEC-Q100, SAM D21J series contains this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. According to Surface Mount, it is mounted. Using the devices' 256kB memory size, you can store programs and data. Its core architecture is based on ARM. At a frequency of 48MHz, it exhibits excellent efficiency. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. A total of 8 timers/counters have been set up. Using an oscillator type Internal, it operates.
ATSAMD21J18A-MFT Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount, Wettable Flank
ATSAMD21J18A-MFT Applications
There are a lot of Microchip Technology ATSAMD21J18A-MFT Microcontroller applications.
- Coffee machines
- Tape drives
- Toys
- Instrument control
- Measuring revolving objects
- Smart highways (navigation, traffic control, information monitoring and car service)
- Leakage current tester
- Fire detection & safety devices
- Calculator
- Microwave ovens
