ATSAMD21J18A-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | SAM D21J |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAMD21J18 |
| JESD-30 Code | S-XQCC-N64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Supply Current-Max | 7mA |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| ROM (words) | 262144 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21J18A-MUT Overview
Due to the benefits of saving space, it is available in the 64-VFQFN Exposed Pad package. This is mounted using the Surface Mount method. There is a Tape & Reel (TR) package available for it. There is a ARM? Cortex?-M0+ as core processor in this device. The temperature should be kept at -40°C~85°C TA while working. Its type of program memory is FLASH. There are 52 I/Os on it. A comparable component can be found by using the base part number ATSAMD21J18. The terminals are positioned at QUAD. As far as terminations are concerned, there are 64 terminations present. It is a member of the SAM D21J series of electrical components. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A method of mounting is used, which is Surface Mount. It falls under the category of Microcontrollers. Memory size for the devices is 256kB, which can be used to store programs and data. The core architecture of the system is ARM. There is a maximum current supply of 7mA. This device achieves excellent efficiency at frequencies of 48MHz. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. 8 timer/counters are present. It is one of the members of the CPU family CORTEX-M0. There is an oscillator type Internal used in this circuit.
ATSAMD21J18A-MUT Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD21J18A-MUT Applications
There are a lot of Microchip Technology ATSAMD21J18A-MUT Microcontroller applications.
- Robots
- Entertainment-radios, CD players, televisions
- Magnetic resonance imaging (MRI)
- Radio
- Entertainment products
- Toys
- Walkie talkies
- Medical instruments chromatographs
- Calculator
- Industrial instrumentation devices
