ATSAME70J21A-AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | SAM E70 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 300MHz |
| Base Part Number | ATSAME70J |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.08V |
| Interface | CAN, Ethernet, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 2MB |
| Oscillator Type | Internal |
| Number of I/O | 44 |
| RAM Size | 384K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M7 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 2MB 2M x 8 |
| Connectivity | CANbus, Ethernet, I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 5x12b; D/A 1x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| ROM (words) | 2097152 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| CPU Family | CORTEX-M7 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| On Chip Data RAM Width | 8 |
| Time-Min | SECONDS |
| Number of DMA Channels | 24 |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAME70J21A-AN Overview
Due to its space-saving qualities, it is available in the 64-LQFP package. In this case, it is mounted using the method of Surface Mount. Package Tray contains it. There is a ARM? Cortex?-M7 as core processor in this device. It is important to keep the temperature at -40°C~105°C TA while working. In terms of its program memory type, it is FLASH. A total of 44 I/Os are present. It has a base part number of ATSAME70J that can be used to find other components that are comparable. At QUAD, it has its terminals. It consists of 64 terminationals. Part of the SAM E70 series, this electrical component is used in a variety of applications. It is possible to achieve high efficiency with a 1.2V supply voltage. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 64 pins are used in its construction. As a result, it is mounted in accordance with Surface Mount. Memory size for the devices is 2MB, which can be used to store programs and data. There is ARM core architecture for this system. The system is highly efficient when working at a frequency of 300MHz. It appears that there are 4 timers/counters in use. It is a member of the CORTEX-M7 family of CPUs. Normal operation requires a supply voltage (Vsup) above 1.08V. An oscillator type Internal is required for it to work.
ATSAME70J21A-AN Features
64-LQFP package
Mounting type of Surface Mount
ATSAME70J21A-AN Applications
There are a lot of Microchip Technology ATSAME70J21A-AN Microcontroller applications.
- Sonography (Ultrasound imaging)
- Smoke alarms
- Answering machines
- Binding machines
- Oscilloscopes
- Paper shredders
- Broadband technology, video and voice processing
- Radio
- Gas monitoring systems
- Fax machines
