ATSAME70N19A-AN
| Parameters | |
|---|---|
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 300MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAME70N |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.08V |
| Interface | CAN, Ethernet, I2C, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 75 |
| RAM Size | 256K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M7 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, Ethernet, I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| CPU Family | CORTEX-M7 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| RAM (words) | 256000 |
| On Chip Data RAM Width | 8 |
| Time-Min | SECONDS |
| Number of DMA Channels | 24 |
| Height Seated (Max) | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | SAM E70 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
ATSAME70N19A-AN Overview
Due to its space-saving qualities, it is available in the 100-LQFP package. Surface Mount is the way to mount it. It is available in the Tray package. Device with ARM? Cortex?-M7 core processor issupported. In order to work effectively, the temperature should be kept at -40°C~105°C TA. FLASH is its program memory type. 75 I/Os can be found on it. Other components that are comparable to it have the base part number ATSAME70N. QUAD is the position of its terminals on the board. It consists of 100 terminationals. An electrical component such as this is included in the series SAM E70. The supply voltage of 1.2V allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. The structure is composed of 100 pins. During the mounting process, the device is mounted based on the Surface Mount method. Using the devices' 512kB memory size, you can store programs and data. ARM forms the basis of its architecture. When working at a frequency of 300MHz it is able to achieve excellent efficiency. There are currently 4 timers/counters set up on the system. This part is an integral part of the CORTEX-M7 CPU family. Normally, the supply voltage (Vsup) should remain above 1.08V. An oscillator type Internal is required for it to work.
ATSAME70N19A-AN Features
100-LQFP package
Mounting type of Surface Mount
ATSAME70N19A-AN Applications
There are a lot of Microchip Technology ATSAME70N19A-AN Microcontroller applications.
- X-ray
- Medical instruments chromatographs
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Digital set-top boxes
- Petrochemical
- Industrial instrumentation devices
- Teletext terminals
- Embedded gateways
- Blood pressure monitors
- Keyboards
