ATSAME70N20A-CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | SAM E70 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 300MHz |
| Base Part Number | ATSAME70N |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.08V |
| Interface | CAN, Ethernet, I2C, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB |
| Memory Size | 1MB |
| Oscillator Type | Internal |
| Number of I/O | 75 |
| RAM Size | 384K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M7 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 1MB 1M x 8 |
| Connectivity | CANbus, Ethernet, I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB |
| Supply Current-Max | 10mA |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 32 |
| CPU Family | CORTEX-M7 |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| Number of Serial I/Os | 8 |
| On Chip Data RAM Width | 32 |
| Number of DMA Channels | 24 |
| Height Seated (Max) | 1.1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
ATSAME70N20A-CN Overview
A space-saving advantage is that it is included in the 100-TFBGA package. In this case, it is mounted using the method of Surface Mount. There is a Tray package available for it. Devices with ARM? Cortex?-M7 core processors are available. When working, it is recommended that the temperature be kept at -40°C~105°C TA. There is FLASH program memory in it. There are 75 I/Os on it, which makes it a very simple device. It has a base part number of ATSAME70N that can be used to find other components that are comparable. The terminals are positioned at BOTTOM. 100 terminationals are present. The electrical component is part of the series SAM E70. By using a 1.2V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is composed of 100 pins. The method of Surface Mount is used to mount it. The devices have a memory size of 1MB that can be used to store programs and data. Its core architecture is ARM. The maximum supply current is 10mA. This device works well at 300MHz frequency when it is operating at a high rate of efficiency. A total of 4 timers/counters have been set up. It is one of the members of the CPU family CORTEX-M7. Vsup should be kept above 1.08V for normal operation. Using an oscillator type Internal, it operates.
ATSAME70N20A-CN Features
100-TFBGA package
Mounting type of Surface Mount
ATSAME70N20A-CN Applications
There are a lot of Microchip Technology ATSAME70N20A-CN Microcontroller applications.
- Current meter
- DDC control
- Process control devices
- 3D printers
- Traditional industrial transformation
- Light sensing & controlling devices
- Magnetic resonance imaging (MRI)
- Home video and audio
- Smart highways (navigation, traffic control, information monitoring and car service)
- Digital TVs
