ATSAME70Q19A-AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | SAM E70 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 300MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAME70Q |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.08V |
| Interface | CAN, EBI/EMI, Ethernet, I2C, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 114 |
| RAM Size | 256K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M7 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 24x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| Address Bus Width | 24 |
| Core Architecture | ARM |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAME70Q19A-AN Overview
There is an option to purchase it in the 144-LQFP package, which saves space. Surface Mount is used for mounting. It comes in the package?of a Tray. A ARM? Cortex?-M7 core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~105°C TA. Memory type FLASH is used for program memory. There are 114 I/Os on it, which makes it a very simple device. In order to find similar components, it has a base part number of ATSAME70Q. At QUAD, it has its terminals. A 144 termination is contained within it. The electrical component is part of the series SAM E70. Because of the 1.2V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. There are 144 pins used in the construction of this device. It is mounted based on the method of Surface Mount. The devices have a maximum memory size of 512kB that can be used to store programs and data. Its core architecture is based on ARM. It performs extremely well at a frequency of 300MHz. A total of 4 timers/counters are present. During normal operation, the supply voltage (Vsup) should be kept above 1.08V. An oscillator type Internal is required for it to work.
ATSAME70Q19A-AN Features
144-LQFP package
Mounting type of Surface Mount
ATSAME70Q19A-AN Applications
There are a lot of Microchip Technology ATSAME70Q19A-AN Microcontroller applications.
- Smoke alarms
- Calculators
- Home video and audio
- Current meter
- Kindle
- Entertainment products
- Data acquisition and control
- Food and beverage
- Smartphone
- Teletext terminals
