ATSAME70Q21A-CNT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LFBGA |
| Number of Pins | 144 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | SAM E70 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 300MHz |
| Base Part Number | ATSAME70Q |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.08V |
| Interface | CAN, EBI/EMI, Ethernet, I2C, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB |
| Memory Size | 2MB |
| Oscillator Type | Internal |
| Number of I/O | 114 |
| RAM Size | 384K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M7 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 2MB 2M x 8 |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 24x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| Address Bus Width | 24 |
| Core Architecture | ARM |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
ATSAME70Q21A-CNT Overview
There is a 144-LFBGA package available to save space. The way of Surface Mount is used to mount it. There is a Tape & Reel (TR) package available for it. There is a ARM? Cortex?-M7 as core processor in this device. The temperature should be kept at -40°C~105°C TA while working. The type of memory in which this program is stored is FLASH. It has a number of 114I/Os. Other components that are comparable to it have the base part number ATSAME70Q. The position of the device is BOTTOM at terminal. There are a total of 144 terminations in it. There are a number of electrical components in the SAM E70 series, including this one. Because the supply voltage is 1.2V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 144 pins are used to construct it. A method of mounting is used, which is Surface Mount. The devices have a maximum memory size of 2MB that can be used to store programs and data. Its core architecture is based on ARM. This device achieves excellent efficiency at frequencies of 300MHz. A total of 4 timers/counters are present. Normal operation requires a supply voltage (Vsup) that is higher than 1.08V. An oscillator of type Internal is used.
ATSAME70Q21A-CNT Features
144-LFBGA package
Mounting type of Surface Mount
ATSAME70Q21A-CNT Applications
There are a lot of Microchip Technology ATSAME70Q21A-CNT Microcontroller applications.
- Xbox
- Toasters
- Multi-meter
- Hard drives
- Guidance-GPS
- Missile control
- Playstation
- Smartphones-calling, video calling, texting, email
- Switches
- Television
