ATSAML21E15B-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | SAM L21E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAML21E |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, LIN, SCI, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.63V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, LINbus, SCI, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAML21E15B-AUT Overview
Due to the benefits of saving space, it is available in the 32-TQFP package. It is mounted using the way of Surface Mount. A package of Tape & Reel (TR) contains it. With a processor of ARM? Cortex?-M0+ cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 25 I/Os are present on the device. In order to find similar components, it has a base part number of ATSAML21E. QUAD is the position of its terminals on the board. It has 32 terminationals. Part of the SAM L21E series, this electrical component is used in a variety of applications. The supply voltage of 3.3V allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. There are 32 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. The devices have a memory size of 32kB that can be used to store programs and data. In terms of architecture, it is based on ARM. At a frequency of 48MHz, it can achieve excellent efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. 6 timers/counters are in use. Internal is the oscillator type it uses.
ATSAML21E15B-AUT Features
32-TQFP package
Mounting type of Surface Mount
ATSAML21E15B-AUT Applications
There are a lot of Microchip Technology ATSAML21E15B-AUT Microcontroller applications.
- Graphic terminals
- Mice
- Security systems
- Instrument control
- Smart highways (navigation, traffic control, information monitoring and car service)
- PDAs, game consoles
- Microwave ovens
- Smartphone
- Multi-meter
- Accu-check
