ATSAML21E16B-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | SAM L21E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 48MHz |
| Base Part Number | ATSAML21E |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, LIN, SCI, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.63V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, LINbus, SCI, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAML21E16B-AUT Overview
To save space, it is included in the 32-TQFP package. It is mounted using the way of Surface Mount. You can find it in the package of Tape & Reel (TR). It is equipped with a ARM? Cortex?-M0+ core processor. The temperature should be kept at -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. 25 I/Os are present on the device. In order to find similar components, it has a base part number of ATSAML21E. The position of the device is QUAD at terminal. It consists of 32 terminationals. It is a member of the SAM L21E series of electrical components. As a result of the 3.3V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. It is constructed using 32 pins. According to Surface Mount, it is mounted. In the device, there is a memory capacity of 64kB which may be used to store programs and data. ARM forms the basis of its architecture. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. There are 6 timers/counters. Using a Internal oscillator type, it works well.
ATSAML21E16B-AUT Features
32-TQFP package
Mounting type of Surface Mount
ATSAML21E16B-AUT Applications
There are a lot of Microchip Technology ATSAML21E16B-AUT Microcontroller applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Dishwashers
- Guidance-GPS
- Blenders
- Smart highways (navigation, traffic control, information monitoring and car service)
- Tape drives
- Communication-bluetooth, Wi-Fi, radio
- Process control devices
- Set-top boxes
- Information appliances (networking of household appliances)
