ATSAML21E17B-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | SAM L21E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 48MHz |
| Base Part Number | ATSAML21E |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, LIN, SCI, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.63V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, LINbus, SCI, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAML21E17B-AUT Overview
A space-saving advantage is that it is included in the 32-TQFP package. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tape & Reel (TR). ARM? Cortex?-M0+ core processor is present on the device. Work should be performed at a temperature of -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 25 I/Os on it, which makes it a very simple device. To find comparable components, use the ATSAML21E base part number. The terminals are positioned at QUAD. 32 terminations are present in it. This electrical component is part of the SAM L21E series. Because of the 3.3V voltage of the supply, high efficiency can be achieved. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. For its construction, 32 pins are used. During the mounting process, the device is mounted based on the Surface Mount method. The devices have a memory size of 128kB that can be used to store programs and data. Its core architecture is ARM. At a frequency of 48MHz, it exhibits excellent efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. 6 timer/counters are present. Internal is the oscillator type it uses.
ATSAML21E17B-AUT Features
32-TQFP package
Mounting type of Surface Mount
ATSAML21E17B-AUT Applications
There are a lot of Microchip Technology ATSAML21E17B-AUT Microcontroller applications.
- Equipment control
- Laminators
- Smart highways (navigation, traffic control, information monitoring and car service)
- DCS control intelligent sensor
- Home video and audio
- Information appliances (networking of household appliances)
- Firewalls
- Volt meter
- Sonography (Ultrasound imaging)
- Robotic prosthetic limbs
