ATSAML21J17B-UUT
| Parameters | |
|---|---|
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | ATSAML21J |
| JESD-30 Code | R-PBGA-B64 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 51 |
| Speed | 48MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.63V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | DMA, POR, PWM, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, LINbus, SCI, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 2x12b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.483mm |
| Length | 3.58mm |
| Width | 3.275mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-XFBGA, WLCSP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2017 |
| Series | SAM L21J |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
ATSAML21J17B-UUT Overview
Due to its space-saving qualities, it is available in the 64-XFBGA, WLCSP package. In this case, it is mounted using the method of Surface Mount. It comes in the package?of a Cut Tape (CT). Device with ARM? Cortex?-M0+ core processor issupported. Work should be performed at a temperature of -40°C~85°C TA. FLASH is the type of program memory used by it. There are 51 I/Os on it, which makes it a very simple device. Based on the ATSAML21J base part number, it can be compared with other components. The terminals of this device are located at BOTTOM. This circuit consists of 64 terminationals. The electrical component is part of the series SAM L21J. High efficiency is possible due to the 3.3V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. In the device, the clock runs at 32MHz. A supply voltage (Vsup) above 1.62V is necessary for normal operation. Internal is the oscillator type it uses.
ATSAML21J17B-UUT Features
64-XFBGA, WLCSP package
Mounting type of Surface Mount
ATSAML21J17B-UUT Applications
There are a lot of Microchip Technology ATSAML21J17B-UUT Microcontroller applications.
- Aerospace navigation systems
- Traditional industrial transformation
- Routers
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Dryers
- Hand-held metering systems
- Industrial robot
- DCS control intelligent sensor
- Current meter
- Computers and laptops-video calling, email, blogging
