ATSAML22G18A-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | SAM L22G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 32MHz |
| Base Part Number | ATSAML22G |
| JESD-30 Code | S-XQCC-N48 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.63V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 10x12b |
| Has ADC | YES |
| DMA Channels | YES |
| DAC Channels | NO |
| Core Architecture | ARM |
| On Chip Program ROM Width | 32 |
| Low Power Mode | YES |
| Screening Level | ISO/TS-16949 |
| Integrated Cache | YES |
| RAM (words) | 8192 |
| Number of Timers | 5 |
| Number of External Interrupts | 16 |
| On Chip Data RAM Width | 32 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAML22G18A-MUT Overview
For space savings, it is available in the 48-VFQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. In the package Tape & Reel (TR), it is included. A ARM? Cortex?-M0+ core processor powers the device. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory it uses is FLASH. It has a number of 36I/Os. A component with the same part number as ATSAML22G can be compared to other similar components. QUAD is the location of its terminals. 48 terminations are present in it. It is a member of the SAM L22G series of electrical components. Using the 3.3V supply voltage allows for high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A device with a memory size of 256kB can store programs and data. Its core architecture is ARM. At a frequency of 32MHz, it exhibits excellent efficiency. A supply voltage (Vsup) above 1.62V is necessary for normal operation. There is an oscillator type Internal used in this circuit.
ATSAML22G18A-MUT Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAML22G18A-MUT Applications
There are a lot of Microchip Technology ATSAML22G18A-MUT Microcontroller applications.
- Security systems
- Projector
- DCS control intelligent sensor
- Playstation
- Xbox
- Dryers
- Heart rate monitors
- Oscilloscopes
- Electronic jamming systems
- Current meter
