ATSAML22G18A-UUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 49-UFBGA, WLCSP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2017 |
| Series | SAM L22G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 49 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | ATSAML22G |
| JESD-30 Code | R-XBGA-B48 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| Speed | 32MHz |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.63V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, LCD, POR, PWM, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 10x12b |
| Has ADC | YES |
| DMA Channels | YES |
| DAC Channels | NO |
| On Chip Program ROM Width | 32 |
| Low Power Mode | YES |
| Screening Level | ISO/TS-16949 |
| Integrated Cache | YES |
| RAM (words) | 8192 |
| Number of Timers | 5 |
| Number of External Interrupts | 16 |
| On Chip Data RAM Width | 32 |
| Height Seated (Max) | 0.48mm |
| Length | 3.149mm |
| Width | 3.048mm |
| RoHS Status | ROHS3 Compliant |
ATSAML22G18A-UUT Overview
There is an option to purchase it in the 49-UFBGA, WLCSP package, which saves space. Using Surface Mount, it is mounted. Cut Tape (CT) is the package that contains it. The device runs in ARM? Cortex?-M0+ core processor. Work should be performed at a temperature of -40°C~85°C TA. It has a type of program memory of FLASH. There are 36 I/Os on it. A component with the same part number as ATSAML22G can be compared to other similar components. The terminals of this device are set to BOTTOM. As far as terminations are concerned, there are 49 terminations present. The SAM L22G series includes this electrical component. As a result of the 3.3V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. Clock frequency in the device is 32MHz. Normal operation requires a supply voltage (Vsup) that is higher than 1.62V. There is an oscillator type Internal used in this circuit.
ATSAML22G18A-UUT Features
49-UFBGA, WLCSP package
Mounting type of Surface Mount
ATSAML22G18A-UUT Applications
There are a lot of Microchip Technology ATSAML22G18A-UUT Microcontroller applications.
- Television
- Dryers
- Process control devices
- Traditional industrial transformation
- Hearing aids
- PDAs, game consoles
- Safety -airbags, automatic braking system (ABS)
- Speed meter
- Smartphone
- Projector
