ATSAMR21G17A-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2014 |
| Series | SMART™ SAM R21 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Type | TxRx + MCU |
| Technology | CMOS |
| Voltage - Supply | 1.8V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Frequency | 2.4GHz |
| Base Part Number | ATSAMR21G |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 128kB Flash 16kB SRAM |
| Number of I/O | 28 |
| RAM Size | 16kB |
| Memory Type | FLASH |
| Bit Size | 32 |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| CPU Family | CORTEX-M0 |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Power - Output | 4dBm |
| Integrated Cache | YES |
| RF Family/Standard | General ISM > 1GHZ |
| RAM (words) | 16000 |
| Data Rate (Max) | 250kbps |
| Serial Interfaces | I2C, SPI, UART, USART, USB |
| Current - Receiving | 11.3mA~11.8mA |
| Current - Transmitting | 7.2mA~13.8mA |
| Number of Serial I/Os | 5 |
| Modulation | O-QPSK |
| Number of External Interrupts | 15 |
| Sensitivity (dBm) | -99 dBm |
| On Chip Data RAM Width | 8 |
| Number of DMA Channels | 12 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAMR21G17A-MU Overview
In order to save board space, RF transceiver IC uses the 48-VFQFN Exposed Pad package. Surface Mount is used to mount the RF transceiver's mounting.With transceiver RF's high efficiency, it appears as a TxRx + MCU.Using advanced packaging techniques Tray, high reliability is ensured.There are 48 pins on the transceiver RF circuit board.Search with ATSAMR21G if you are looking for transceiver variants.The mount is attached to Surface Mount.RF transceivers from the well-known SMART? SAM R21 series product line are featured in this RF transceiver.In this RF transceiver, the frequency is 2.4GHz.
ATSAMR21G17A-MU Features
48-VFQFN Exposed Pad package
Surface Mount for mounting
TxRx + MCU
Tray is used
48 pins
Use ATSAMR21G
SMART? SAM R21 series
ATSAMR21G17A-MU Applications
There are a lot of Microchip Technology ATSAMR21G17A-MU RF Transceiver ICs applications.
- Patient Asset Tracking
- Internet of Things (IoT)
- Health and Fitness
- Home and Security
- HVAC
- Chemical Sensors
- Power Amplifier (PA)
- LoT applications
- Consumer Electronics
- Switch
