ATSAMS70N19A-CFN
| Parameters | |
|---|---|
| Connectivity | I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB |
| Supply Current-Max | 10mA |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| ROM (words) | 131072 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 32 |
| CPU Family | CORTEX-M7 |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 65536 |
| Number of Serial I/Os | 8 |
| On Chip Data RAM Width | 32 |
| Number of DMA Channels | 24 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-VFBGA |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | SAM S70 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Frequency | 300MHz |
| Base Part Number | ATSAMS70N |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.08V |
| Interface | I2C, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 75 |
| RAM Size | 256K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.08V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M7 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
ATSAMS70N19A-CFN Overview
A space-saving advantage is that it is included in the 100-VFBGA package. Surface Mount is used for mounting. A package of Tray contains it. The device has a ARM? Cortex?-M7 core processor. Working at -40°C~105°C TA temperature is recommended. Its type of program memory is FLASH. There are 75 I/Os on it, which makes it a very simple device. To find comparable components, use the ATSAMS70N base part number. At BOTTOM, its terminals are located. It consists of 100 terminationals. The electrical component is part of the series SAM S70. As a result of the 1.2V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 100 pins are required to construct this device. It is mounted based on the method of Surface Mount. Data and programs can be stored on the devices with a memory size of 512kB. ARM is the foundation of its architecture. Supply current is maximum at 10mA. At a frequency of 300MHz, it can achieve excellent efficiency. There are 4 timers/counters. As part of the CORTEX-M7 CPU family, this component is included. Normally, the supply voltage (Vsup) should remain above 1.08V. Using an oscillator type of Internal, it works.
ATSAMS70N19A-CFN Features
100-VFBGA package
Mounting type of Surface Mount
ATSAMS70N19A-CFN Applications
There are a lot of Microchip Technology ATSAMS70N19A-CFN Microcontroller applications.
- Electromechanical control
- Current meter
- Auto-breaking system
- Process control devices
- Magnetic resonance imaging (MRI)
- Mobile computers
- Entertainment-radios, CD players, televisions
- Smartphones-calling, video calling, texting, email
- Aerospace navigation systems
- Digital set-top boxes
