banner_page

ATSAMS70N20A-ANT

1MB 1M x 8 FLASH ARM? Cortex?-M7 32-Bit Microcontroller SAM S70 Series ATSAMS70N 100 Pin 300MHz 1.2V 100-LQFP


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-ATSAMS70N20A-ANT
  • Package: 100-LQFP
  • Datasheet: PDF
  • Stock: 670
  • Description: 1MB 1M x 8 FLASH ARM? Cortex?-M7 32-Bit Microcontroller SAM S70 Series ATSAMS70N 100 Pin 300MHz 1.2V 100-LQFP (Kg)

Details

Tags

Parameters
RAM Size 384K x 8
Voltage - Supply (Vcc/Vdd) 1.08V~3.6V
uPs/uCs/Peripheral ICs Type MICROCONTROLLER, RISC
Core Processor ARM® Cortex®-M7
Peripherals Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT
Program Memory Type FLASH
Core Size 32-Bit
Program Memory Size 1MB 1M x 8
Connectivity I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB
Bit Size 32
Data Converter A/D 10x12b; D/A 2x12b
Watchdog Timer Yes
Has ADC YES
DMA Channels YES
Data Bus Width 32b
PWM Channels YES
DAC Channels YES
Number of Timers/Counters 4
Core Architecture ARM
Height Seated (Max) 1.6mm
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 100-LQFP
Number of Pins 100
Operating Temperature -40°C~105°C TA
Packaging Tape & Reel (TR)
Published 2016
Series SAM S70
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Supply Voltage 1.2V
Terminal Pitch 0.5mm
Frequency 300MHz
Base Part Number ATSAMS70N
Supply Voltage-Max (Vsup) 1.32V
Supply Voltage-Min (Vsup) 1.08V
Interface I2C, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB
Memory Size 1MB
Oscillator Type Internal
Number of I/O 75

ATSAMS70N20A-ANT Overview


To save space, it is included in the 100-LQFP package. It is mounted using the way of Surface Mount. Tape & Reel (TR) is the package that contains it. A core processor of ARM? Cortex?-M7 is present in the device. When working, it is recommended that the temperature be kept at -40°C~105°C TA. The type of memory in which this program is stored is FLASH. The device has 75 I/Os. It has a part number of ATSAMS70N that can be used to locate similar components. At QUAD, its terminals are located. Currently, it consists of 100 terminationals. An electrical component such as this is included in the series SAM S70. High efficiency is possible due to the 1.2V supply voltage. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. 100 pins are used to construct it. A method of mounting is used, which is Surface Mount. Memory size for the devices is 1MB, which can be used to store programs and data. ARM forms the basis of its architecture. Working at a frequency of 300MHz results in excellent efficiency. 4 timer/counters are present. In order to ensure normal operation, the supply voltage (Vsup) must remain above 1.08V. An oscillator type Internal is required for it to work.

ATSAMS70N20A-ANT Features


100-LQFP package
Mounting type of Surface Mount

ATSAMS70N20A-ANT Applications


There are a lot of Microchip Technology ATSAMS70N20A-ANT Microcontroller applications.

  • Blenders
  • Hearing aids
  • DCS control intelligent sensor
  • Food and beverage
  • Volt meter
  • Process control devices
  • Microwave ovens
  • Robotic prosthetic limbs
  • Coffee machines
  • Equipment control

Write a review

Note: HTML is not translated!
    Bad           Good