ATSAMS70N20A-CFN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-VFBGA |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | SAM S70 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Frequency | 300MHz |
| Base Part Number | ATSAMS70N |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.08V |
| Interface | I2C, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB |
| Memory Size | 1MB |
| Oscillator Type | Internal |
| Number of I/O | 75 |
| RAM Size | 384K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.08V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M7 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 1MB 1M x 8 |
| Connectivity | I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB |
| Supply Current-Max | 10mA |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 32 |
| CPU Family | CORTEX-M7 |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| Number of Serial I/Os | 8 |
| On Chip Data RAM Width | 32 |
| Number of DMA Channels | 24 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMS70N20A-CFN Overview
There is a 100-VFBGA package available to save space. Surface Mount is used for mounting. You can find it in the package of Tray. With a processor of ARM? Cortex?-M7 cores, the device is powered. Work should be performed at a temperature of -40°C~105°C TA. The type of memory it uses is FLASH. 75 I/Os can be found on it. A comparable component can be found by using the base part number ATSAMS70N. At BOTTOM, it has its terminals. It has 100 terminationals. The SAM S70 series includes this electrical component. The 1.2V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. There are 100 pins used in the construction of this device. It is mounted based on the method of Surface Mount. The devices have a memory size of 1MB that can be used to store programs and data. The architecture of its core is ARM. There is a maximum current supply of 10mA. The system is highly efficient when working at a frequency of 300MHz. 4 counters/timers are currently active. It is part of the CORTEX-M7 CPU family. During normal operation, the supply voltage (Vsup) should be kept above 1.08V. The oscillator type Internal is used to operate the device.
ATSAMS70N20A-CFN Features
100-VFBGA package
Mounting type of Surface Mount
ATSAMS70N20A-CFN Applications
There are a lot of Microchip Technology ATSAMS70N20A-CFN Microcontroller applications.
- Digital cameras
- Coffee machines
- Volt meter
- Laminators
- Digital TVs
- Instrument control
- Teletext terminals
- PDAs, game consoles
- Ipod
- Firewalls
