ATSAMS70Q20B-ANT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2018 |
| Series | SAM S70 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ATSAMS70Q |
| JESD-30 Code | S-PQFP-G144 |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.08V |
| Oscillator Type | Internal |
| Number of I/O | 114 |
| Speed | 300MHz |
| RAM Size | 384K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.08V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M7 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Clock Frequency | 20MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 1MB 1M x 8 |
| Connectivity | EBI/EMI, I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 24x12b; D/A 2x12b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| Address Bus Width | 24 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| External Data Bus Width | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | ROHS3 Compliant |
ATSAMS70Q20B-ANT Overview
Due to the benefits of saving space, it is available in the 144-LQFP package. This is mounted using the Surface Mount method. Cut Tape (CT) is the package that contains it. The device has a ARM? Cortex?-M7 core processor. During work, the temperature should remain at -40°C~105°C TA. It has a type of program memory of FLASH. The device has 114 I/Os. To find equivalent components, use its ATSAMS70Q base part number. QUAD is the position of its terminals on the board. It has 144 terminationals. In the SAM S70 series, this electrical component is found. The 1.2V supply voltage enables high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. In the device, there is a clock running at 20MHz. Vsup should be kept above 1.08V for normal operation. There is an oscillator type Internal used in this circuit.
ATSAMS70Q20B-ANT Features
144-LQFP package
Mounting type of Surface Mount
ATSAMS70Q20B-ANT Applications
There are a lot of Microchip Technology ATSAMS70Q20B-ANT Microcontroller applications.
- Teletext terminals
- Computers and laptops-video calling, email, blogging
- DVD\DV\MP3 players
- Guidance-GPS
- Microwave ovens
- Automatic staplers
- Keyboards
- Dryers
- Communication-bluetooth, Wi-Fi, radio
- Graphic terminals
