ATSAMS70Q21B-ANT

2MB 2M x 8 FLASH ARM? Cortex?-M7 32-Bit Microcontroller SAM S70 Series ATSAMS70Q 1.2V 144-LQFP

Manufacturer: Microchip Technology
Nocochips NO: 536-ATSAMS70Q21B-ANT
Package: 144-LQFP
Datasheet: PDF
Stock: 807
Description: 2MB 2M x 8 FLASH ARM? Cortex?-M7 32-Bit Microcontroller SAM S70 Series ATSAMS70Q 1.2V 144-LQFP (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	144-LQFP
Surface Mount	YES
Operating Temperature	-40°C~105°C TA
Packaging	Cut Tape (CT)
Published	2018
Series	SAM S70
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	144
Technology	CMOS
Terminal Position	QUAD
Terminal Form	GULL WING
Supply Voltage	1.2V
Terminal Pitch	0.5mm
Base Part Number	ATSAMS70Q
JESD-30 Code	S-PQFP-G144
Supply Voltage-Max (Vsup)	1.32V
Supply Voltage-Min (Vsup)	1.08V
Oscillator Type	Internal
Number of I/O	114
Speed	300MHz
RAM Size	384K x 8
Voltage - Supply (Vcc/Vdd)	1.08V~3.6V
uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC
Core Processor	ARM® Cortex®-M7
Peripherals	Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT
Clock Frequency	20MHz
Program Memory Type	FLASH
Core Size	32-Bit
Program Memory Size	2MB 2M x 8
Connectivity	EBI/EMI, I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB
Bit Size	32
Data Converter	A/D 24x12b; D/A 2x12b
Has ADC	YES
DMA Channels	YES
PWM Channels	YES
DAC Channels	YES
Address Bus Width	24
On Chip Program ROM Width	8
Screening Level	TS 16949
External Data Bus Width	16
Height Seated (Max)	1.6mm
Length	20mm
Width	20mm
RoHS Status	ROHS3 Compliant

ATSAMS70Q21B-ANT Overview

Due to the benefits of saving space, it is available in the 144-LQFP package. The way of mounting it is Surface Mount. This item can be found in package Cut Tape (CT). The device has a ARM? Cortex?-M7 core processor. When working, it is recommended that the temperature be kept at -40°C~105°C TA. Its type of program memory is FLASH. 114 I/Os are present on the device. Based on the ATSAMS70Q base part number, it can be compared with other components. At QUAD, its terminals are located. It has 144 terminationals. There are a number of electrical components in the SAM S70 series, including this one. Because of the 1.2V voltage of the supply, high efficiency can be achieved. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. In the device, the clock runs at a frequency of 20MHz. Vsup should be kept above 1.08V for normal operation. The oscillator type Internal is used to operate the device.