ATTINY13-20SSUR
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATTINY13 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Memory Size | 1kB |
| Oscillator Type | Internal |
| Number of I/O | 6 |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1KB 512 x 16 |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| EEPROM Size | 64 x 8 |
| Length | 5.29mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | AVR® ATtiny |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
ATTINY13-20SSUR Overview
Due to its space-saving qualities, it is available in the 8-SOIC (0.154, 3.90mm Width) package. In this case, it is mounted using the method of Surface Mount. A package of Tape & Reel (TR) contains it. A core processor of AVR is present in the device. Work should be done at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. A total of 6 I/Os are present. To find equivalent components, use its ATTINY13 base part number. The terminals of this device are set to DUAL. A 8 termination is contained within it. Part of the AVR? ATtiny series, this electrical component is used in a variety of applications. Because of the 5V voltage of the supply, high efficiency can be achieved. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 8 pins are required to construct this device. The method of Surface Mount is used to mount it. This is a component included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 1kB. There is a source of power of 3/5V that powers this device. Using a frequency of 20MHz, it is very efficient. 1 timer/counters are present. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. Using a Internal oscillator type, it works well.
ATTINY13-20SSUR Features
8-SOIC (0.154, 3.90mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY13-20SSUR Applications
There are a lot of Microchip Technology ATTINY13-20SSUR Microcontroller applications.
- Traditional industrial transformation
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Industrial instrumentation devices
- Digital set-top boxes
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Automatic control
- Wastewater treatment
- Petrochemical
- Digital cameras
- Smartphones-calling, video calling, texting, email
