ATTINY13A-MMUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | AVR® ATtiny |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATTINY13A |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Memory Size | 1kB |
| Oscillator Type | Internal |
| Number of I/O | 6 |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1KB 512 x 16 |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| EEPROM Size | 64 x 8 |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
ATTINY13A-MMUR Overview
For the purpose of saving space, it is available in the 10-VFDFN Exposed Pad package. The way of Surface Mount is used to mount it. It comes in a Tape & Reel (TR) package. The device runs in AVR core processor. Working at -40°C~85°C TA temperature is recommended. The type of memory in which this program is stored is FLASH. There are 6 I/Os on the board. It has a part number of ATTINY13A that can be used to locate similar components. The terminals are positioned at QUAD. It consists of 10 terminationals. This electrical component is part of the AVR? ATtiny series. It is possible to achieve high efficiency with a 5V supply voltage. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. For its construction, 10 pins are used. It is mounted based on the method of Surface Mount. In Microcontrollers, this component is included. In the device, there is a memory capacity of 1kB which may be used to store programs and data. A 2/5V source is used for powering it. Working at a frequency of 20MHz results in excellent efficiency. There are currently 1 timers/counters set up on the system. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. There is an oscillator type Internal used in this circuit.
ATTINY13A-MMUR Features
10-VFDFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY13A-MMUR Applications
There are a lot of Microchip Technology ATTINY13A-MMUR Microcontroller applications.
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Electronic jamming systems
- Computers and laptops-video calling, email, blogging
- Dryers
- Petrochemical
- Calculators
- Accu-check
- Entertainment products
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Hearing aids
