ATTINY167-A15XZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | Automotive, AEC-Q100, AVR® ATtiny |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATTINY167 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | 2-Wire, I2C, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USI |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 512 x 8 |
| Height Seated (Max) | 1.1mm |
| Length | 6.5mm |
| RoHS Status | ROHS3 Compliant |
ATTINY167-A15XZ Overview
A space-saving advantage is that it is included in the 20-TSSOP (0.173, 4.40mm Width) package. A Surface Mount mounting method is used. This item can be found in package Tape & Reel (TR). A core processor of AVR is present in the device. When working, the temperature should be kept at -40°C~125°C TA. It has a type of program memory of FLASH. There are 16 I/Os on the board. A comparable component can be found by using the base part number ATTINY167. The position of the device is DUAL at terminal. As far as terminations are concerned, there are 20 terminations present. Automotive, AEC-Q100, AVR? ATtiny is the series number of this electrical component. High efficiency is possible due to the 5V supply voltage. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A total of 20 pins are required to construct this device. This mount is done in accordance with the method of Surface Mount. The devices have a maximum memory size of 16kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 16MHz. A total of 2 timers/counters have been set up. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. Using an oscillator type of Internal, it works.
ATTINY167-A15XZ Features
20-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
ATTINY167-A15XZ Applications
There are a lot of Microchip Technology ATTINY167-A15XZ Microcontroller applications.
- Robotic prosthetic limbs
- Information appliances (networking of household appliances)
- Telephone sets
- Food and beverage
- Security systems
- Wastewater treatment
- Binding machines
- Accu-check
- 3D printers
- Smartphones-calling, video calling, texting, email
