ATTINY2313A-MU
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 2kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 2KB 1K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| Number of I2C Channels | 1 |
| Height | 750μm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATtiny |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATTINY2313A |
ATTINY2313A-MU Overview
Due to its space-saving qualities, it is available in the 20-WFQFN Exposed Pad package. This is mounted using the Surface Mount method. It is available in the Tray package. Devices with AVR core processors are available. Maintain a temperature of -40°C~85°C TA while working. The type of memory it uses is FLASH. 18 I/Os can be found on it. Other components that are comparable to it have the base part number ATTINY2313A. This device has terminals at QUAD. It consists of 20 terminationals. The electrical component is part of the series AVR? ATtiny. The supply voltage of 5V allows for high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. 20 pins are used to construct it. According to Surface Mount, it is mounted. This component is a part of Microcontrollers. In the device, there is a memory capacity of 2kB which may be used to store programs and data. It should be noted that 7mA represents the maximum supply current. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. There are currently 2 timers/counters set up on the system. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. An oscillator type Internal is required for it to work.
ATTINY2313A-MU Features
20-WFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY2313A-MU Applications
There are a lot of Microchip Technology ATTINY2313A-MU Microcontroller applications.
- Light sensing & controlling devices
- Industrial instrumentation devices
- Virtual reality VR robots
- PDAs, game consoles
- Computer/laptop
- Projector
- Robotic prosthetic limbs
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Electrocardiogram (EKG)
- Electromechanical control
