ATTINY2313V-10MU
| Parameters | |
|---|---|
| Base Part Number | ATTINY2313 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | SPI, UART, USART |
| Memory Size | 2kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 2KB 1K x 16 |
| Connectivity | SPI, UART/USART |
| Supply Current-Max | 6mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| EEPROM Size | 128 x 8 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 200μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATtiny |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
ATTINY2313V-10MU Overview
It is available in the 20-WFQFN Exposed Pad package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. This item can be found in package Tray. The device runs in AVR core processor. Work should be performed at a temperature of -40°C~85°C TA. Memory type FLASH is used for program memory. A total of 18 I/Os are present. Based on its base part number of ATTINY2313, other similarly-sized components can be found. The terminals are positioned at QUAD. It has 20 terminationals. Part of the AVR? ATtiny series, this electrical component is used in a variety of applications. The 3V supply voltage enables high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed using 20 pins. Based on the Surface Mount method, it is mounted. It falls under the category of Microcontrollers. A device with a memory size of 2kB can store programs and data. In this case, 6mA represents the maximum current supply. It is highly efficient when it works at a frequency of 10MHz. The oscillator type Internal is used to operate the device.
ATTINY2313V-10MU Features
20-WFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY2313V-10MU Applications
There are a lot of Microchip Technology ATTINY2313V-10MU Microcontroller applications.
- Safety -airbags, automatic braking system (ABS)
- 3D printers
- DDC control
- Wastewater treatment
- Microwave ovens
- Scanners
- Embedded gateways
- Industrial robot
- Robotic prosthetic limbs
- Automatic control
