ATTINY24A-CCU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 15-UFBGA |
| Number of Pins | 15 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATtiny |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 15 |
| Terminal Finish | Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni) |
| Additional Feature | ALSO OPERATES 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Base Part Number | ATTINY24A |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Memory Size | 2kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 2KB 1K x 16 |
| Connectivity | USI |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| Height Seated (Max) | 0.6mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
ATTINY24A-CCU Overview
Due to the benefits of saving space, it is available in the 15-UFBGA package. A Surface Mount mounting method is used. You can find it in the package of Tray. The device runs in AVR core processor. Work should be performed at a temperature of -40°C~85°C TA. FLASH is the type of program memory used by it. The device has 12 I/Os. A component with the same part number as ATTINY24A can be compared to other similar components. At BOTTOM, it has its terminals. It consists of 15 terminationals. This electrical component is part of the AVR? ATtiny series. It is possible to achieve high efficiency with a 5V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. 15 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. It belongs to the subcategory Microcontrollers. Data and programs may be stored on the devices which have a memory size of 2kB. A maximum supply current of 7mA is set. This device achieves excellent efficiency at frequencies of 20MHz. 2 timer/counters are present. There is also the property of ALSO OPERATES 1.8 V MINIMUM SUPPLY AT 4 MHZ associated with it. A supply voltage (Vsup) above 4.5V is necessary for normal operation. There is an oscillator type Internal used in this circuit.
ATTINY24A-CCU Features
15-UFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY24A-CCU Applications
There are a lot of Microchip Technology ATTINY24A-CCU Microcontroller applications.
- Air fryers
- Projector
- Removable disks
- Heater/Fan
- Speed meter
- Refrigerators
- Calculators
- Digital TVs
- Volt meter
- Entertainment products
