ATTINY24A-MM8R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 1997 |
| Series | AVR® ATtiny |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3V |
| Terminal Pitch | 0.45mm |
| Frequency | 20MHz |
| Base Part Number | ATTINY24A |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | SPI |
| Memory Size | 2kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 2KB 1K x 16 |
| Connectivity | USI |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| RoHS Status | ROHS3 Compliant |
ATTINY24A-MM8R Overview
There is a 20-VFQFN Exposed Pad package available to save space. In this case, it is mounted using the method of Surface Mount. In the package Cut Tape (CT), it is included. With a processor of AVR cores, the device is powered. Working at -40°C~125°C TA temperature is recommended. Memory type FLASH is used for program memory. There are 12 I/Os on it, which makes it a very simple device. To find comparable components, use the ATTINY24A base part number. The terminals of this device are set to QUAD. It has 20 terminationals. In the AVR? ATtiny series, this electrical component is found. Because of the 3V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. For its construction, 20 pins are used. During the mounting process, the device is mounted based on the Surface Mount method. In the subcategory of Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 2kB. There is a maximum current supply of 7mA. It is highly efficient when it works at a frequency of 20MHz. A total of 2 timers/counters have been set up. During normal operation, the supply voltage (Vsup) should be kept above 1.8V. The oscillator type Internal is used to operate the device.
ATTINY24A-MM8R Features
20-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY24A-MM8R Applications
There are a lot of Microchip Technology ATTINY24A-MM8R Microcontroller applications.
- Smart instruments
- Washing machine
- Fire detection & safety devices
- Telephone sets
- Computer/laptop
- Tape drives
- Communication-bluetooth, Wi-Fi, radio
- Printers
- Data acquisition and control
- Nintendo
