ATTINY25-15SZ
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | Automotive, AEC-Q100, AVR® ATtiny |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATTINY25 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI, UART |
| Memory Size | 2kB |
| Oscillator Type | Internal |
| Number of I/O | 6 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 2KB 1K x 16 |
| Connectivity | USI |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATTINY25-15SZ Overview
It is available in the 8-SOIC (0.209, 5.30mm Width) package for the benefit of saving space. A Surface Mount mounting method is used. In the package Tape & Reel (TR), it is included. It is equipped with a AVR core processor. When working, it is recommended that the temperature be kept at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. There are 6 I/Os on it, which makes it a very simple device. A component with the same part number as ATTINY25 can be compared to other similar components. DUAL is the position of its terminals on the board. 8 terminationals are present. The Automotive, AEC-Q100, AVR? ATtiny series contains this electrical component. The supply voltage of 5V allows for high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. 8 pins are used to construct it. A method of mounting is used, which is Surface Mount. It belongs to the subcategory Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 2kB. It is important to note that the maximum supply current is 15mA. There is 3/5V power source in this device. It performs extremely well at a frequency of 16MHz. 2 counters/timers are currently active. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. There is an oscillator type Internal used in this circuit.
ATTINY25-15SZ Features
8-SOIC (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY25-15SZ Applications
There are a lot of Microchip Technology ATTINY25-15SZ Microcontroller applications.
- Telephone sets
- Accu-check
- Television
- Sonography (Ultrasound imaging)
- Security systems
- Industrial instrumentation devices
- Kindle
- Digital TVs
- Heart rate monitors
- Microwave ovens
