ATTINY25-20SN
| Parameters | |
|---|---|
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 2KB 1K x 16 |
| Connectivity | USI |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | AVR® ATtiny |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATTINY25 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Memory Size | 2kB |
| Oscillator Type | Internal |
| Number of I/O | 6 |
ATTINY25-20SN Overview
Due to the benefits of saving space, it is available in the 8-SOIC (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. This item can be found in package Tube. It is equipped with a AVR core processor. In order to work effectively, the temperature should be kept at -40°C~105°C TA. FLASH is the type of program memory used by it. There are 6 I/Os on the board. Based on its base part number of ATTINY25, other similarly-sized components can be found. This device has terminals at DUAL. There are a total of 8 terminations in it. In the AVR? ATtiny series, this electrical component is found. By using a 5V voltage supply, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. The structure is composed of 8 pins. According to Surface Mount, it is mounted. It is one of the components included in Microcontrollers. The devices have a maximum memory size of 2kB that can be used to store programs and data. Powered by a 3/5V source. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. A total of 2 timers/counters have been set up. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. It works with an oscillator type Internal.
ATTINY25-20SN Features
8-SOIC (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY25-20SN Applications
There are a lot of Microchip Technology ATTINY25-20SN Microcontroller applications.
- Tape drives
- Television
- Projectors
- Computed Tomography (CT scan)
- Electronic jamming systems
- Teletext terminals
- Digital TVs
- Nintendo
- 3D printers
- Vacuum cleaners
