ATTINY261A-MN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATtiny |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Additional Feature | ALSO OPERATES AT MINIMUM 1.8 V SUPPLY |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATTINY261A |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Voltage | 5V |
| Interface | SPI |
| Memory Size | 2kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 2KB 1K x 16 |
| Connectivity | USI |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATTINY261A-MN Overview
It is available in the 32-VFQFN Exposed Pad package for the benefit of saving space. It is mounted using the way of Surface Mount. In the package Tray, it is included. AVR core processor is present on the device. When working, it is recommended that the temperature be kept at -40°C~105°C TA. FLASH is the type of program memory used by it. The device has 16 I/Os. Based on the ATTINY261A base part number, it can be compared with other components. The terminals of this device are located at QUAD. It consists of 32 terminationals. The AVR? ATtiny series includes this electrical component. High efficiency is possible due to the 5V supply voltage. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. The structure is composed of 32 pins. During the mounting process, the device is mounted based on the Surface Mount method. Subcategory Microcontrollers includes this component. In the device, there is a memory capacity of 2kB which may be used to store programs and data. It should be noted that 7mA represents the maximum supply current. Working at a frequency of 20MHz results in excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. A total of 2 timers/counters have been set up. There is also the property of ALSO OPERATES AT MINIMUM 1.8 V SUPPLY associated with it. It works with an oscillator type Internal.
ATTINY261A-MN Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY261A-MN Applications
There are a lot of Microchip Technology ATTINY261A-MN Microcontroller applications.
- Communication-bluetooth, Wi-Fi, radio
- Leakage current tester
- Smart instruments
- Missile control
- Projectors
- Mobile computers
- Volt meter
- Industrial instrumentation devices
- Microwave ovens
- Heart rate monitors
