ATTINY4313-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATtiny |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATTINY4313 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 256 x 8 |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 256 |
| Number of External Interrupts | 1 |
| Number of I2C Channels | 1 |
| Height | 750μm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATTINY4313-MU Overview
Due to its space-saving qualities, it is available in the 20-WFQFN Exposed Pad package. The way of Surface Mount is used to mount it. There is a Tray package available for it. Devices with AVR core processors are available. During work, the temperature should remain at -40°C~85°C TA. Memory type FLASH is used for program memory. A total of 18 I/Os are available on this device. A component with the same part number as ATTINY4313 can be compared to other similar components. The position of the device is QUAD at terminal. A 20 termination is contained within it. Part of the AVR? ATtiny series, this electrical component is used in a variety of applications. High efficiency is possible due to the 5V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. The structure is constructed from 20 pins. It is mounted based on the method of Surface Mount. This component is a part of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 4kB. Supply current cannot exceed 7mA. At a frequency of 20MHz, it exhibits excellent efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. There are currently 2 timers/counters set up on the system. Using an oscillator type Internal, it operates.
ATTINY4313-MU Features
20-WFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY4313-MU Applications
There are a lot of Microchip Technology ATTINY4313-MU Microcontroller applications.
- Fax machines
- Equipment control
- X-ray
- Fabric
- Walkie talkies
- DVD\DV\MP3 players
- Mobile computers
- Dryers
- Nintendo
- Embedded gateways
